- 8-channel Serial-ATA adapter with 300MB/s per channel
- 64-bit PCI-X interface
- Software RAID supported

- 4 internal ports support up to 128 SATA/SAS I/O devices using SAS expanders
- 800MHz Dual Core RAID on Chip (ROC)
- High-performance RAID 0, 1 & 10
- 128MB DDR2 cache
- Low-profile MD2 form factor
- Supports SATA and SAS tape drives
- 3Gb/s throughput at each drive port
- x8 PCI Express host interface
- Enclosure management support via LED header and SES2/SGPIO
- RoHS compliant

- Intelligent Power Management
- 8 internal ports
- MD2
- Low profile form factor
- 1.2GHz Dual Core RAID on Chip (ROC)
- 8-Lane PCI-Express bus interface
- 0, 1, 1E, 5, 5EE, 6, 10, 50, 60, JBOD
- 512MB DDR2 cache
- 2 SFF-8087 (int.)
- Up to 256 SATA or SAS devices using SAS expanders
- Adaptec Storage Manager, Copyback Hot Spare management features
- Battery backup (optional)
- RoHS compliant

- Bateria Backup Supermicro para controladora Raid

- Bateria Backup Supermicro para controladora Raid

- LSISAS 1068E 8-port PCI-E SAS controller
- 8-port (4 internal and 4 external), 3Gb/s per port
- Supports RAID 0, 1, 10
- Supports RAID 5 with iButton
- 16MB onboard SRAM
- Supports MegaRAID Storage Manager Software
- Automatically negotiates PCI-E link widths
- Power management support
- Supports 1.5 and 3.0 Gb/s SAS and SATA data transfer ratesr>
- Port independent auto-negotiation
- Supports SSP, SMP, STP and SATA protocols
- OS Support : Windows 2000/XP/2003, RedHat Enterprise and SUSE Linux

- LSISAS 1078 8-port PCI-E SAS controller
- 8-port (8 internal) 3Gb/s per port
- Supports RAID 0, 1, 5, 6, 10, 50, 60
- On board hardware IO Processor
- 256MB 667MHz DDR2 on-card cache
- Advanced array configuration and management utilities
- Automatically negotiates PCI-E link widths
- Power management support
- Supports 1.5 and 3.0 Gb/s SAS and SATA data transfer rates
- Port independent auto-negotiation
- Supports SSP, SMP, STP and SATA protocols
- Optional Battery Backup Unit for cached data protection (BTR-0012L)
- OS Support : Windows 2000/XP/2003, RedHat Enterprise and SUSE Linux

- Suporta até 240 Dispositivos físicos
- Controlador LSISAS 1078 PCI-E SAS
- 4 portas (internas) e 4 portas (externas), 3 Gb/s por cada porta
- Suporta RAID 0,1,5,6,10,50,60
- Processador IO onboard
- Memória : 256 MB 667 MHz DDR2
- Suporta SAS 1.5 e 3.0 Gb/s Compatível com : Motherboards :
- X7DBU
- X7DBN
- X7DAL-E
- X7DAL-E+
- PDSMU
- H8SMU
- H8DMU+ Servidores :
- 6015B-UR
- 6015B-NTR
- 6015B-NT
- 6015B-U
- 5015M-NT
- 5015M-UR
- 5015M-N

- LSI Logic offers a family of MegaRAID battery backup units for use with our high-performance MegaRAID storage adapters. These backup units protect the integrity of the cached data by providing power if there is a complete AC power failure or a brief power outage. The MegaRAID battery backup units provide an inexpensive alternative to using an uninterruptible power supply.
- Type : Backup Battery Unit Support MegaRAID Adapters :
- MegaRAID SATA 300-8X
- MegaRAID SATA 300-8ELP
- MegaRAID SATA 300-4XLP
- MegaRAID SAS 8308ELP
- MegaRAID SAS 8344ELP

Para a controladora Intel SRCSAS144E

- Part Number : AOC-IBUTTON68
- Memory Type : EEPROM
- Memory Size : 1K bits
- Unique, factory-lasered and tested 64-bit registration number (8-bit family code + 48-bit serial number + 8-bit CRC tester) assures absolute traceability because no two parts are alike
- Multidrop controller for 1-Wire net
- Digital identification and information by momentary contact
- Chip-based data carrier compactly stores information
- Data can be accessed while affixed to object
- Button shape is self-aligning with cup-shaped probes
- Stainless steel case engraved with registration number withstands harsh environments
- Easily affixed with self-stick adhesive backing, latched by its flange, or locked with a ring pressed onto its rim
- Presence detector acknowledges when reader first applies voltage Features :
- 512-bit SHA-1 Engine
- Five General-Purpose Read/Write Registers
- Monetary
- One 64-bit Write-Only Secret
- Secure
- Secure Hash Standard
- Unique 64-bit Serial Number

- Cabo SAS de 39 cm iPass a iPass, para controladora RAID.

- Unidade de bateria de backup para controladora SAS da marca LSI;
- Fornece energia suficiente para guardar os dados em memória, no caso de falha na alimentação do pc.

- Controladora RAID SCSI de 2 canais Ultra320
- 128MB de memória cache ECC SDRAM, integrados na placa
- Suporta o IA-64 (processador Intel Itanium a 64 bits)
- Processador de I/O integrado: Intel® IOP321
- Taxas de transferência até 640MB/seg. (2 canais)
- Suporta o standard "Microsoft® Cluster Server"
- Utilitários de configuração e gestão avançados
- Até 30 dispositivos físicos por adaptador
- Função de "Auto Resume" durante a reconstrucção ou reconfiguração do volume
- Inicialização em "background" para uma configuração rápida do "Quick RAID 5" FlexRAID® :
- expansão de capacidade online
- migração de nível RAID online Solução de elevada performance e baixo custo, ideal para :
- servidores de entrada de gama
- estações de trabalho de alta performance
- Interface : PCI-X 1.0, 64 bits, 133MHz;
- Suporta ACPI Conectores :
- 2 internos de 68 pinos HDCI
- 2 externos de 68 pinos VHDCI Suporta os seguintes níveis de RAID :
- 0 ; 1 ; 5 ; 10 ; 50
- 1 ano de Garantia.

- Intel AXXRAKSW5 RAID Activation Key to enable SAS and/or SATA Software RAID 5
- Intel RAID Activation Key and supporting RAID 0, 1, 5
- Activated Software RAID 5 on SAS and/or SATA
- Supported on Inte S5000PSLSATA , S5000XSLSATA , S5000PSLSAS S5000PSLROMB
- RoHS Compliant

- CHIPSET : LSI 1078
- MEMORIA : Ships with 128MB DIMM
- PCI BUS : PCI Express* x4
- CANAIS : 8 SATA ports internal 3.0Gb/s data-transfer rates
- FORMATO : Low profile, 7.75? length
- NIVEL DE RAID : 0, 1, 5, 6, 10, 50, and 60
- BATERIA : Yes (Optional ? purchased separately) AXXRSBBU4

- CHIPSET : LSI 1078
- MEMORIA : Ships with 256MB DIMM
- PCI BUS : PCI Express* x4
- CANAIS : 8 SAS/SATA ports internal supporting point-to-point 3.0Gb/s data-transfer rates
- FORMATO : Low profile, 7.75? length
- NIVEL DE RAID : 0, 1, 5, 6, 10, 50, and 60
- BATERIA : Yes (Optional ? purchased separately) AXXRSBBU4

- CHIPSET : LSI 1078
- MEMORIA : Ships with 512MB DIMM (Supports up to 1GB mini-DIMM ECC DDR2 667 MHz SDRAM)
- PCI BUS : PCI Express* x8
- CANAIS : 8 SAS/SATA ports configurable in groups of 4 for up to 8 internal or 8 external ports supporting point-to-point 3.0Gb/s data-transfer rates
- FORMATO : Low profile, 8.25? length
- NIVEL DE RAID : 0, 1, 5, 6, 10, 50, and 60
- BATERIA : Yes (Optional ? purchased separately) AXXRSBBU3

- The Intel RAID Controller SRCSAS144E is a low profile card that addresses both internal and external storage requirements while providing point-to-point connections for performance and reliability. With support for both Serial ATA (SATA) and Serial Attached SCSI (SAS) devices, this controller gives businesses the ability to customize RAID solutions.

Portas: 2 x 32 pins SFF-8484 SAS 300
- Serial Attached SCSI Interno Memorias:256MB ECC DDR2 Suporte de unidades: 8

- 8-port SAS/SATA controller
- 1.5 and 3 Gb/s SAS and SATA data transfer rates per port, full duplex
- Port independent auto-negotiation
- Point to point SAS/SATA drive connection
- Supports SATA II
- Native command queuing (available post launch)
- Port selector for dual-port drives
- x4 PCI Express* host interface
- Supports 3.3 volt signaling levels
- Hot plug/hot swap support
- PCI power management
- Interrupt coalescing
- Flash and local memory interface
- Supports SAS devices at speeds up to 300 MB/second per port
- Supports the SATA II protocol over SAS transport
- Contains eight internal SAS ports
- Supports up to 8 physical devices
- Supports RAID levels 0, 1, 5, and 10
- Physical drive roaming
- RAID controller migration
- Fast logical drive initialization
- Hot-spare drive configuration
- SAS/SATA drive hot plug
- Auto rebuild
- 64 KB stripe size configured per logical drive
- SES2 intelligent enclosure support
- Background data integrity test

- Com esta placa Belkin adicione duas portas SATAII RAID (1 externa e outra interna) ao seu computador.
- Interface : PCI-Express.

- Controlador SATAII RAID2 Belkin
- Nº de portas : 2
- Interface : PCI-Express

- Bateria Adaptec ABM-800 para controladora Compatível com as controladoras :
- Adaptec RAID 5085
- Adaptec RAID 51245
- Adaptec RAID 51645
- Adaptec RAID 52445
- Adaptec RAID 5405
- Adaptec RAID 5445
- Adaptec RAID 5805
- Adaptec RAID 3085
- Adaptec RAID 31205
- Adaptec RAID 31605
- Adaptec RAID 3405
- Adaptec RAID 3805

- 4 ports support up to 4 SATA and SAS drives
- PCIe host interface
- 3 Gb/s per port
- RAID levels 0, 1, 1E, 5, 5EE, 6, 10, 50, 60, JBOD
- Copyback Hot Spare and optional Snapshot Backup
- LED header for drive activity and failure indication
- SES2 and SGPIO enclosure management
- 128MB DDR2 fixed data cache
- MD2 low-profile form factor
- RoHS compliant
- Optional battery backup module

- 4 ports support up to 4 SATA and SAS drives
- PCIe host interface
- 3 Gb/s per port
- RAID levels 0, 1, 1E, 5, 5EE, 6, 10, 50, 60, JBOD
- Copyback Hot Spare and optional Snapshot Backup
- LED header for drive activity and failure indication
- SES2 and SGPIO enclosure management
- 128MB DDR2 fixed data cache
- MD2 low-profile form factor
- RoHS compliant
- Optional battery backup module

System Environment :
- Entry-level SCSI servers and workstations, pedestal and rackmount Cache Memory :
- 128 MByte embedded DDR memory RAID Levels :
- Standard : 0, 1, 10, 5, 50, JBOD Key RAID Features :
- Optimized Disk Utilization, Online RAID Level Migration, Online Capacity Expansion, S.M.A.R.T and SAF-TE support, SNMP support as well as the features from the Adaptec Advanced Data Protection Suite including:
- Striped Mirror (RAID 1E)
- Hot Space (RAID 5EE)
- Dual Drive Failure Protection (RAID 6, 60)
- Copyback Hot Spare
- Optional RAID Features
- Snapshot Backup
- Number of devices : 15 SCSI devices per channel
- Bus System Interface Type : 64-bit/133MHz PCI-X, or 3.3 volt only PCI
- External Connectors : One 68-pin VHDCI
- Internal Connectors : One 68-pin high-density
- Data Transfer Rate : Up to 320 MByte/sec
- System Requirements : Available 3.3 volt PCI-X slot

- The Adaptec 2120S supports a range of operating systems (Windows XP/NT/2000, Linux, NetWare, and Caldera) and RAID configurations (0, 1, 10, 5, 50, and JBOD). The Ultra320 SCSI RAID card features a low-profile MD2 form factor, and accommodates an optionally available battery backup module (ABM-300) for 72-hour cache memory protection.

- 4 Serial ATA 3Gb/s Ports for support of up to 4 SATA disk drives
- PCI-X/133MHz host interface (supports PCI 32/64bit as well)
- RAID 0, 1, 10, and JBOD
- Native Command Queuing
- 48-bit LBA support for drives above 137GB
- Low-profile form factor
- Bootable array support
- Background initialization
- RoHS compliant

- RAID 0/1 SATAII PCIe X1 SEM CABO
- 2x eSATA connectors
- Data Transfer Rate: Up to 3 Gb/s
- PCI Express x1 Interface
- RAID 0, 1 & JBOD
- Native Command Queuing
- 48-bit LBA support for drives above 137GB

- 4 internal ports
- MD2
- Low profile form factor
- 1.2GHz Dual Core RAID on Chip (ROC)
- 8-Lane PCI-Express bus interface
- 0, 1, 1E, 5, 5EE, 6, 10, 50, 60, JBOD
- 256MB DDR2 cache
- 1 SFF-8087 (int.) connectors
- Up to 256 SATA or SAS drives using SAS expanders
- Adaptec Storage Manager, Copyback Hot Spare management features
- Battery backup (optional)
- Multiple RAID LUN support
- RoHS compliant

- 8 ports support up to 8 SATA and SAS drives
- PCIe host interface
- 3 Gb/s per port
- RAID levels 0, 1, 1E, 5, 5EE, 6, 10, 50, 60, JBOD
- Copyback Hot Spare and optional Snapshot Backup
- LED header for drive activity and failure indication
- SES2 and SGPIO enclosure management
- 128MB* DDR2 fixed data cache
- MD2 low-profile form factor
- RoHS compliant
- Optional battery backup module

- 8 ports, half-size PCI-X to Serial ATA II controller supporting RAID 0, 1, 5, 10, 50 and JBOD, and the Adaptec Advanced Data Protection Suite with RAID 1E, 5EE, 6, 60, Copyback Hot Spare and optional Snapshot Backup for pedestal and high-density rack-mount servers.

- 4 Serial ATA 3Gb/s Ports for support of up to 4 SATA disk drives
- PCI-X/133MHz host interface (supports PCI 32/64bit as well)
- RAID 0, 1, 10, and JBOD
- Native Command Queuing
- 48-bit LBA support for drives above 137GB
- Low-profile form factor
- Bootable array support
- Background initialization
- RoHS compliant

- 4 internal ports support up to 128 SATA/SAS I/O devices using SAS expanders
- 800MHz Dual Core RAID on Chip (ROC)
- High-performance RAID 0, 1 & 10
- 128MB DDR2 cache
- Low-profile MD2 form factor
- Supports SATA and SAS tape drives
- 3Gb/s throughput at each drive port
- x8 PCI Express host interface
- Enclosure management support via LED header and SES2/SGPIO
- RoHS compliant

- 2 Serial ATA 3Gb/s Ports for support of up to 2 SATA disk drives
- PCI Express x1 host interface
- RAID 0, 1, and JBOD
- Native Command Queuing
- 48-bit LBA support for drives above 137GB
- Low-profile form factor
- SATA tape support
- Bootable array support
- RoHS compliant